Manualshelf

Administrator Guide

ManualsBrandsDell ManualsComputer AccessoriesPOWEREDGE M1000E
61626364656667686970
Table Of Contents
26 Fabric OS Administrator’s Guide
53-1001763-02
Date and time settings
2
date "mmddHHMMyy"
The values represent the following:
• mm is the month; valid values are 01 through 12.
• dd is the date; valid values are 01 through 31.
• HH is the hour; valid values are 00 through 23.
• MM is minutes; valid values are 00 through 59.
• yy is the year, valid values are 00-37 and 70-99 (year values from 70-99 are interpreted as
1970-1999, year values from 00-37 are interpreted as 2000-2037).
Example of showing and setting the date
switch:admin> date
Fri Sep 29 17:01:48 UTC 2007
Stealth200E:admin> date "0204101008"
Mon Feb 4 10:10:00 UTC 2008
Time zone settings
You can set the time zone for a switch by name. You can specify the setting using country and city
or time zone parameters. Switch operation does not depend on a date and time setting. However,
having an accurate time setting is needed for accurate logging and audit tracking.
If the time zone is not set with new options, the switch retains the offset time zone settings. The
tsTimeZone command includes an option to revert to the prior time zone format. For more
information about the tsTimeZone command, refer to the Fabric OS Command Reference.
When you set the time zone for a switch, you can perform the following tasks:
• Display all of the time zones supported in the firmware.
• Set the time zone based on a country and city combination or based on a time zone ID,l
such as PST.
The time zone setting has the following characteristics:
• Users can view the time zone settings. However, only those with administrative
permissions can set the time zones.
• The setting automatically adjusts for Daylight Savings Time.
• Changing the time zone on a switch updates the local time zone setup and is reflected in
local time calculations.
• By default, all switches are in the GMT time zone (0,0). If all switches in a fabric are in one
time zone, it is possible for you to keep the time zone setup at the default setting.
• System services that have already started will reflect the time zone changes only after the
next reboot.
• Time zone settings persist across failover for high availability.
Setting the time zone on a dual domain director has the following characteristics:
• Updating the time zone on any switch updates the entire director.
• The time zone of the entire director is the time zone of switch 0.