Users Guide

2-417

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13271-03

Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands

remote command

Use the remote command privileged EXEC command to monitor all or specified stack members.

remote command {all | stack-member-number} LINE

Note This command is supported only on stacking-capable switches.

Syntax Description

Command Modes Privileged EXEC

Command History

Usage Guidelines The commands (such as debug, show, or clear) you use in the LINE command-to-execute string apply

to a specific stack member or to the switch stack.

Examples This example shows how to execute the undebug command on the switch stack:

Switch(config)# remote command all undebug all

Switch :1 :

------------

All possible debugging has been turned off

Switch :5 :

------------

All possible debugging has been turned off

Switch :9 :

------------

All possible debugging has been turned off

This example shows how to execute the debug udld event command on stack member 5:

Switch(config)# remote command 5 undebug all

Switch :5 :

------------

UDLD events debugging is on

all Apply to all stack members.

stack-member-number Specify the stack member. The range is 1 to 9.

LINE Specify the command to execute.

Release Modification

12.2(40)EX1 This command was introduced.