Users Guide

Software User’s ManualRev 1.00

• Downlink (server blade) does not support the link protocol of the port group to which it is

attached

• Uplink (remote peer) does not support the link protocol of the port group to which it is attached

The following drawing demonstrates link protocol mismatch conditions:

Figure 2: Link Protocol Mismatch Examples

1.4 LED Behavior

The LED behavior is described in the following table:

Table 3 - LED Behavior

Condition Green LED Amber LED Description

Link down off off This condition occurs in the following cases:

• Server blade not present, powered down, or link is

inactive

• Uplink port module not present

• Uplink port cable not connected

• One or both of the internal and/or external links is

down