Command Reference Guide

606 Fabric OS Command Reference
53-1001764-02
portAlpaShow
2
portAlpaShow
Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port.
Synopsis portalpashow [slot/]port
Description Use this command to display the AL_PAs of devices connected to a port, and whether these devices
are public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this
command prints an error.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slot For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
port Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
Examples To display the AL_PAs of a port:
switch:user> portalpashow 4/14
AL_PA type AL_PA type AL_PA type
0xe2 public 0xe4 public
See Also switchShow