Configuration manual

Index
IN-4
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
authentication manager
CLI commands 10-9
compatibility with older 802.1x CLI commands 10-9
overview 10-7
authoritative time source, described 7-2
authorization
with RADIUS 8-27
with TACACS+ 8-11, 8-16
authorized ports with IEEE 802.1x 10-10
autoconfiguration 3-3
auto enablement 10-30
automatic advise (auto-advise) in switch stacks 6-14
automatic copy (auto-copy) in switch stacks 6-13
automatic extraction (auto-extract) in switch stacks 6-13
automatic QoS
See QoS
automatic upgrades (auto-upgrade) in switch stacks 6-13
auto-MDIX
configuring 11-22
described 11-22
autonegotiation
duplex mode 1-4
interface configuration guidelines 11-19
mismatches 47-9
autonomous system boundary routers
See ASBRs
autonomous systems, in BGP 38-49
Auto-RP, described 44-7
autosensing, port speed 1-4
autostate exclude 11-6
auxiliary VLAN
See voice VLAN
availability, features 1-7
B
BackboneFast
described 20-7
disabling 20-17
enabling 20-16
support for 1-7
backup interfaces
See Flex Links
backup links 21-2
banners
configuring
login 7-18
message-of-the-day login 7-18
default configuration 7-17
when displayed 7-17
BGP
aggregate addresses 38-62
aggregate routes, configuring 38-62
CIDR 38-62
clear commands 38-65
community filtering 38-58
configuring neighbors 38-60
default configuration 38-47
described 38-46
enabling 38-49
monitoring 38-65
multipath support 38-53
neighbors, types of 38-49
path selection 38-53
peers, configuring 38-60
prefix filtering 38-57
resetting sessions 38-52
route dampening 38-64
route maps 38-55
route reflectors 38-63
routing domain confederation 38-62
routing session with multi-VRF CE 38-86
show commands 38-65