Configuration manual

Index
IN-23
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
IP unicast routing (continued)
See also BGP
See also EIGRP
See also OSPF
See also RIP
IPv4 ACLs
applying to interfaces 34-20
extended, creating 34-11
named 34-15
standard, creating 34-10
IPv6
ACLs
displaying 35-8
limitations 35-2
matching criteria 35-3
port 35-1
precedence 35-2
router 35-1
supported 35-2
addresses 39-2
address formats 39-2
and switch stacks 39-9
applications 39-5
assigning address 39-11
autoconfiguration 39-5
CEFv6 39-19
configuring static routes 39-20
default configuration 39-11
default router preference (DRP) 39-4
defined 39-1
Enhanced Interior Gateway Routing Protocol (EIGRP)
IPv6
39-7
EIGRP IPv6 Commands 39-7
Router ID 39-7
feature limitations 39-8
features not supported 39-8
forwarding 39-11
ICMP 39-4
monitoring 39-27
IPv6 (continued)
neighbor discovery 39-4
OSPF 39-6
path MTU discovery 39-4
SDM templates 9-2, 25-1, 35-1
stack master functions 39-10
supported features 39-2
switch limitations 39-8
understanding static routes 39-6
IPv6 traffic, filtering 35-3
IRDP
configuring 38-14
definition 38-13
support for 1-13
IS-IS
addresses 38-66
area routing 38-66
default configuration 38-68
monitoring 38-75
show commands 38-75
system routing 38-66
ISL
and IPv6 39-3
and trunk ports 11-3
encapsulation 1-8, 13-16
trunking with IEEE 802.1 tunneling 17-5
ISO CLNS
clear commands 38-75
dynamic routing protocols 38-66
monitoring 38-75
NETs 38-66
NSAPs 38-66
OSI standard 38-66
ISO IGRP
area routing 38-66
system routing 38-66
isolated port 16-2
isolated VLANs 16-2, 16-3