Configuration manual

Index
IN-25
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
link redundancy
See Flex Links
links, unidirectional 29-1
link state advertisements (LSAs) 38-31
link-state protocols 38-3
link-state tracking
configuring 37-24
described 37-22
LLDP
configuring 28-4
characteristics 28-5
default configuration 28-4
enabling 28-5
monitoring and maintaining 28-10
overview 28-1
supported TLVs 28-2
switch stack considerations 28-2
transmission timer and holdtime, setting 28-5
LLDP-MED
configuring
procedures 28-4
TLVs 28-6
monitoring and maintaining 28-10
overview 28-1, 28-2
supported TLVs 28-2
LLDP Media Endpoint Discovery
See LLDP-MED
load balancing 40-4
local SPAN 30-2
location TLV 28-3, 28-7
logging messages, ACL 34-9
login authentication
with RADIUS 8-23
with TACACS+ 8-14
login banners 7-17
log messages
See system message logging
Long-Reach Ethernet (LRE) technology 1-19
loop guard
described 20-11
enabling 20-18
support for 1-8
M
MAC/PHY configuration status TLV 28-2
MAC addresses
aging time 7-21
and VLAN association 7-20
building the address table 7-20
default configuration 7-21
disabling learning on a VLAN 7-27
discovering 7-28
displaying 7-27
displaying in the IP source binding table 22-20
dynamic
learning 7-20
removing 7-22
in ACLs 34-28
IP address association 38-10
manually assigning IP address 3-15
static
adding 7-24
allowing 7-26, 7-27
characteristics of 7-24
dropping 7-25
removing 7-24
MAC address learning 1-6
MAC address learning, disabling on a VLAN 7-27
MAC address notification, support for 1-14
MAC address-table move update
configuration guidelines 21-8
configuring 21-12
default configuration 21-8
description 21-6
monitoring 21-14
MAC address-to-VLAN mapping 13-28