Configuration manual

Index
IN-27
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
monitoring (continued)
IGMP
filters 24-29
snooping 24-16, 25-11
interfaces 11-28
IP
address tables 38-19
multicast routing 44-61
routes 38-108
IP SLAs operations 41-13
IPv4 ACL configuration 34-40
IPv6 39-27
IPv6 ACL configuration 35-8
IS-IS 38-75
ISO CLNS 38-75
Layer 2 protocol tunneling 17-18
MAC address-table move update 21-14
MSDP peers 45-18
multicast router interfaces 24-17, 25-12
multi-VRF CE 38-90
MVR 24-24
network traffic for analysis with probe 30-2
object tracking 42-10
OSPF 38-35
port
blocking 26-19
protection 26-19
private VLANs 16-15
RP mapping information 44-35
SFP status 11-28, 47-10
source-active messages 45-18
speed and duplex mode 11-20
SSM mapping 44-23
traffic flowing among switches 31-1
traffic suppression 26-19
tunneling 17-18
VLAN
filters 34-41
maps 34-41
monitoring (continued)
VLANs 13-16
VMPS 13-33
VTP 14-16
mrouter Port 21-3
mrouter port 21-5
MSDP
benefits of 45-3
clearing MSDP connections and statistics 45-18
controlling source information
forwarded by switch 45-11
originated by switch 45-8
received by switch 45-13
default configuration 45-4
dense-mode regions
sending SA messages to 45-16
specifying the originating address 45-17
filtering
incoming SA messages 45-14
SA messages to a peer 45-12
SA requests from a peer 45-10
join latency, defined 45-6
meshed groups
configuring 45-15
defined 45-15
originating address, changing 45-17
overview 45-1
peer-RPF flooding 45-2
peers
configuring a default 45-4
monitoring 45-18
peering relationship, overview 45-1
requesting source information from 45-8
shutting down 45-15
source-active messages
caching 45-6
clearing cache entries 45-18
defined 45-2
filtering from a peer 45-10