Configuration manual

Index
IN-28
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
MSDP (continued)
filtering incoming 45-14
filtering to a peer 45-12
limiting data with TTL 45-13
monitoring 45-18
restricting advertised sources 45-9
support for 1-13
MSTP
boundary ports
configuration guidelines 19-16
described 19-6
BPDU filtering
described 20-3
enabling 20-14
BPDU guard
described 20-2
enabling 20-13
CIST, described 19-3
CIST regional root 19-3
CIST root 19-5
configuration guidelines 19-15, 20-12
configuring
forward-delay time 19-23
hello time 19-22
link type for rapid convergence 19-24
maximum aging time 19-23
maximum hop count 19-24
MST region 19-16
neighbor type 19-25
path cost 19-21
port priority 19-19
root switch 19-17
secondary root switch 19-19
switch priority 19-21
CST
defined 19-3
operations between regions 19-3
default configuration 19-14
default optional feature configuration 20-12
MSTP (continued)
displaying status 19-26
enabling the mode 19-16
EtherChannel guard
described 20-10
enabling 20-17
extended system ID
effects on root switch 19-17
effects on secondary root switch 19-19
unexpected behavior 19-18
IEEE 802.1s
implementation 19-6
port role naming change 19-6
terminology 19-5
instances supported 18-10
interface state, blocking to forwarding 20-2
interoperability and compatibility among
modes
18-11
interoperability with IEEE 802.1D
described 19-8
restarting migration process 19-25
IST
defined 19-2
master 19-3
operations within a region 19-3
loop guard
described 20-11
enabling 20-18
mapping VLANs to MST instance 19-16
MST region
CIST 19-3
configuring 19-16
described 19-2
hop-count mechanism 19-5
IST 19-2
supported spanning-tree instances 19-2
optional features supported 1-8
overview 19-2