Configuration manual
Index
IN-30
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
N
NAC
AAA down policy 1-11
critical authentication 10-20, 10-51
IEEE 802.1x authentication using a RADIUS
server
10-56
IEEE 802.1x validation using RADIUS server 10-56
inaccessible authentication bypass 1-11, 10-51
Layer 2 IEEE 802.1x validation 1-10, 10-56
Layer 2 IP validation 1-10
named IPv4 ACLs 34-15
named IPv6 ACLs 35-2
NameSpace Mapper
See NSM
native VLAN
and IEEE 802.1Q tunneling 17-4
configuring 13-24
default 13-24
NEAT
configuring 10-57
overview 10-30
neighbor discovery, IPv6 39-4
neighbor discovery/recovery, EIGRP 38-37
neighbors, BGP 38-60
Network Admission Control
See NAC
Network Assistant
benefits 1-2
described 1-5
downloading image files 1-3
guide mode 1-3
management options 1-3
managing switch stacks 6-2, 6-18
upgrading a switch B-24
wizards 1-3
network configuration examples
data center 1-19
expanded data center 1-19
increasing network performance 1-18
providing network services 1-18
small to medium-sized network 1-20
network design
performance 1-18
services 1-18
Network Edge Access Toplogy
See NEAT
network management
CDP 27-1
RMON 31-1
SNMP 33-1
network performance, measuring with IP SLAs 41-2
network policy TLV 28-2, 28-7
Network Time Protocol
See NTP
no commands 2-4
nonhierarchical policy maps
configuration guidelines 36-32
configuring 36-48
described 36-9
non-IP traffic filtering 34-28
nontrunking mode 13-18
normal-range VLANs 13-4
configuration guidelines 13-6
configuration modes 13-7
configuring 13-4
defined 13-1
no switchport command 11-4
not-so-stubby areas
See NSSA
NSAPs, as ISO IGRP addresses 38-66
NSF Awareness
IS-IS 38-68
NSM 5-3
NSSA, OSPF 38-31