Configuration manual

Index
IN-40
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
route maps
BGP 38-55
policy-based routing 38-101
router ACLs
defined 34-2
types of 34-4
route reflectors, BGP 38-63
router ID, OSPF 38-35
route selection, BGP 38-53
route summarization, OSPF 38-32
route targets, VPN 38-78
routing
default 38-3
dynamic 38-3
redistribution of information 38-96
static 38-3
routing domain confederation, BGP 38-62
Routing Information Protocol
See RIP
routing protocol administrative distances 38-94
RSPAN 30-3
and stack changes 30-10
characteristics 30-9
configuration guidelines 30-17
default configuration 30-11
destination ports 30-8
displaying status 30-28
in a switch stack 30-2
interaction with other features 30-9
monitored ports 30-6
monitoring ports 30-8
overview 1-14, 30-1
received traffic 30-5
session limits 30-12
RSPAN (continued) 30-3
sessions
creating 30-18
defined 30-4
limiting source traffic to specific VLANs 30-20
specifying monitored ports 30-18
with ingress traffic enabled 30-22
source ports 30-6
transmitted traffic 30-6
VLAN-based 30-7
RSTP
active topology 19-9
BPDU
format 19-12
processing 19-13
designated port, defined 19-9
designated switch, defined 19-9
interoperability with IEEE 802.1D
described 19-8
restarting migration process 19-25
topology changes 19-13
overview 19-9
port roles
described 19-9
synchronized 19-11
proposal-agreement handshake process 19-10
rapid convergence
cross-stack rapid convergence 19-11
described 19-10
edge ports and Port Fast 19-10
point-to-point links 19-10, 19-24
root ports 19-10
root port, defined 19-9
See also MSTP
running configuration
replacing B-20, B-21
rolling back B-20, B-21
saving 3-15