Configuration manual

Index
IN-53
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
VLANs (continued)
creating in config-vlan mode 13-9
creating in VLAN configuration mode 13-10
customer numbering in service-provider
networks
17-3
default configuration 13-8
deleting 13-10
described 11-2, 13-1
displaying 13-16
extended-range 13-1, 13-12
features 1-8
illustrated 13-2
internal 13-13
in the switch stack 13-6
limiting source traffic with RSPAN 30-20
limiting source traffic with SPAN 30-16
modifying 13-9
multicast 24-18
native, configuring 13-24
normal-range 13-1, 13-4
number supported 1-8
parameters 13-5
port membership modes 13-3
static-access ports 13-11
STP and IEEE 802.1Q trunks 18-11
supported 13-2
Token Ring 13-6
traffic between 13-2
VLAN-bridge STP 18-11, 46-2
VTP modes 14-3
VLAN Trunking Protocol
See VTP
VLAN trunks 13-16
VMPS
administering 13-33
configuration example 13-34
configuration guidelines 13-30
default configuration 13-30
description 13-28
VMPS (continued)
dynamic port membership
described 13-29
reconfirming 13-32
troubleshooting 13-33
mapping MAC addresses to VLANs 13-28
monitoring 13-33
reconfirmation interval, changing 13-32
reconfirming membership 13-32
retry count, changing 13-32
voice aware 802.1x security
port-based authentication
configuring 10-39
described 10-27, 10-39
voice-over-IP 15-1
voice VLAN
Cisco 7960 phone, port connections 15-1
configuration guidelines 15-3
configuring IP phones for data traffic
override CoS of incoming frame 15-6
trust CoS priority of incoming frame 15-6
configuring ports for voice traffic in
IEEE 802.1p priority tagged frames 15-5
IEEE 802.1Q frames 15-5
connecting to an IP phone 15-4
default configuration 15-3
described 15-1
displaying 15-7
IP phone data traffic, described 15-2
IP phone voice traffic, described 15-2
VPN
configuring routing in 38-85
forwarding 38-79
in service provider networks 38-76
routes 38-77
VPN routing and forwarding table
See VRF
VQP 1-8, 13-28