Configuration manual

Contents
xiv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Monitoring Interface Status 11-28
Clearing and Resetting Interfaces and Counters 11-29
Shutting Down and Restarting the Interface 11-29
CHAPTER 12 Configuring Smartports Macros 12-1
Understanding Smartports Macros 12-1
Configuring Smartports Macros 12-2
Default Smartports Macro Configuration 12-2
Smartports Macro Configuration Guidelines 12-2
Creating Smartports Macros 12-4
Applying Smartports Macros 12-5
Applying Cisco-Default Smartports Macros 12-6
Displaying Smartports Macros 12-8
CHAPTER 13 Configuring VLANs 13-1
Understanding VLANs 13-1
Supported VLANs 13-2
VLAN Port Membership Modes 13-3
Configuring Normal-Range VLANs 13-4
Token Ring VLANs 13-6
Normal-Range VLAN Configuration Guidelines 13-6
VLAN Configuration Mode Options 13-7
VLAN Configuration in config-vlan Mode 13-7
VLAN Configuration in VLAN Database Configuration Mode 13-7
Saving VLAN Configuration 13-7
Default Ethernet VLAN Configuration 13-8
Creating or Modifying an Ethernet VLAN 13-9
Deleting a VLAN 13-10
Assigning Static-Access Ports to a VLAN 13-11
Configuring Extended-Range VLANs 13-12
Default VLAN Configuration 13-12
Extended-Range VLAN Configuration Guidelines 13-13
Creating an Extended-Range VLAN 13-14
Creating an Extended-Range VLAN with an Internal VLAN ID 13-15
Displaying VLANs 13-16
Configuring VLAN Trunks 13-16
Trunking Overview 13-16
Encapsulation Types 13-19
IEEE 802.1Q Configuration Considerations 13-19