Configuration manual

Contents
xv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Default Layer 2 Ethernet Interface VLAN Configuration 13-20
Configuring an Ethernet Interface as a Trunk Port 13-20
Interaction with Other Features 13-20
Configuring a Trunk Port 13-21
Defining the Allowed VLANs on a Trunk 13-22
Changing the Pruning-Eligible List 13-23
Configuring the Native VLAN for Untagged Traffic 13-24
Configuring Trunk Ports for Load Sharing 13-24
Load Sharing Using STP Port Priorities 13-25
Load Sharing Using STP Path Cost 13-27
Configuring VMPS 13-28
Understanding VMPS 13-28
Dynamic-Access Port VLAN Membership 13-29
Default VMPS Client Configuration 13-30
VMPS Configuration Guidelines 13-30
Configuring the VMPS Client 13-30
Entering the IP Address of the VMPS 13-31
Configuring Dynamic-Access Ports on VMPS Clients 13-31
Reconfirming VLAN Memberships 13-32
Changing the Reconfirmation Interval 13-32
Changing the Retry Count 13-32
Monitoring the VMPS 13-33
Troubleshooting Dynamic-Access Port VLAN Membership 13-33
VMPS Configuration Example 13-34
CHAPTER
14 Configuring VTP 14-1
Understanding VTP 14-1
The VTP Domain 14-2
VTP Modes 14-3
VTP Advertisements 14-3
VTP Version 2 14-4
VTP Pruning 14-4
VTP and Switch Stacks 14-6
Configuring VTP 14-6
Default VTP Configuration 14-7
VTP Configuration Options 14-7
VTP Configuration in Global Configuration Mode 14-7
VTP Configuration in VLAN Database Configuration Mode 14-8