Configuration manual

Contents
xxxii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Understanding Link-State Tracking 37-22
Configuring Link-State Tracking 37-24
Default Link-State Tracking Configuration 37-24
Link-State Tracking Configuration Guidelines 37-24
Configuring Link-State Tracking 37-25
Displaying Link-State Tracking Status 37-26
CHAPTER 38 Configuring IP Unicast Routing 38-1
Understanding IP Routing 38-2
Types of Routing 38-3
IP Routing and Switch Stacks 38-3
Steps for Configuring Routing 38-5
Configuring IP Addressing 38-6
Default Addressing Configuration 38-6
Assigning IP Addresses to Network Interfaces 38-7
Use of Subnet Zero 38-8
Classless Routing 38-8
Configuring Address Resolution Methods 38-10
Define a Static ARP Cache 38-11
Set ARP Encapsulation 38-11
Enable Proxy ARP 38-12
Routing Assistance When IP Routing is Disabled 38-12
Proxy ARP 38-13
Default Gateway 38-13
ICMP Router Discovery Protocol (IRDP) 38-13
Configuring Broadcast Packet Handling 38-15
Enabling Directed Broadcast-to-Physical Broadcast Translation 38-15
Forwarding UDP Broadcast Packets and Protocols 38-16
Establishing an IP Broadcast Address 38-17
Flooding IP Broadcasts 38-18
Monitoring and Maintaining IP Addressing 38-19
Enabling IP Unicast Routing 38-20
Configuring RIP 38-20
Default RIP Configuration 38-21
Configuring Basic RIP Parameters 38-22
Configuring RIP Authentication 38-23
Configuring Summary Addresses and Split Horizon 38-24
Configuring Split Horizon 38-25