Configuration manual

Contents
xxxv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
CHAPTER 39 Configuring IPv6 Unicast Routing 39-1
Understanding IPv6 39-1
IPv6 Addresses 39-2
Supported IPv6 Unicast Routing Features 39-2
128-Bit Wide Unicast Addresses 39-3
DNS for IPv6 39-4
Path MTU Discovery for IPv6 Unicast 39-4
ICMPv6 39-4
Neighbor Discovery 39-4
Default Router Preference 39-4
IPv6 Stateless Autoconfiguration and Duplicate Address Detection 39-5
IPv6 Applications 39-5
Dual IPv4 and IPv6 Protocol Stacks 39-5
DHCP for IPv6 Address Assignment 39-6
Static Routes for IPv6 39-6
RIP for IPv6 39-6
OSPF for IPv6 39-6
EIGRP for IPv6 39-7
HSRP for IPv6 39-7
SNMP and Syslog Over IPv6 39-7
HTTP(S) Over IPv6 39-8
Unsupported IPv6 and Unicast Routing Features 39-8
Limitations 39-8
IPv6 and Switch Stacks 39-9
Configuring IPv6 39-10
Default IPv6 Configuration 39-11
Configuring IPv6 Addressing and Enabling IPv6 Host Functions or Routing 39-11
Configuring Default Router Preference 39-13
Configuring IPv4 and IPv6 Protocol Stacks 39-14
Configuring DHCP for IPv6 Address Assignment 39-15
Default DHCPv6 Address Assignment Configuration 39-15
DHCPv6 Address Assignment Configuration Guidelines 39-15
Enabling DHCPv6 Server Function 39-16
Enabling DHCPv6 Client Function 39-18
Configuring IPv6 ICMP Rate Limiting 39-18
Configuring CEF and dCEF for IPv6 39-19
Configuring Static Routes for IPv6 39-19
Configuring RIP for IPv6 39-21
Configuring OSPF for IPv6 39-22