Configuration manual
Contents
xxxviii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-13270-03
Bootstrap Router 44-7
Multicast Forwarding and Reverse Path Check 44-8
Understanding DVMRP 44-9
Understanding CGMP 44-9
Multicast Routing and Switch Stacks 44-10
Configuring IP Multicast Routing 44-10
Default Multicast Routing Configuration 44-11
Multicast Routing Configuration Guidelines 44-11
PIMv1 and PIMv2 Interoperability 44-11
Auto-RP and BSR Configuration Guidelines 44-12
Configuring Basic Multicast Routing 44-12
Configuring Source-Specific Multicast 44-14
SSM Components Overview 44-14
How SSM Differs from Internet Standard Multicast 44-15
SSM IP Address Range 44-15
SSM Operations 44-15
IGMPv3 Host Signalling 44-16
Configuration Guidelines 44-16
Configuring SSM 44-17
Monitoring SSM 44-17
Configuring Source Specific Multicast Mapping 44-18
Configuration Guidelines 44-18
SSM Mapping Overview 44-18
Configuring SSM Mapping 44-20
Monitoring SSM Mapping 44-23
Enabling PIM Stub Routing 44-23
Configuring a Rendezvous Point 44-24
Manually Assigning an RP to Multicast Groups 44-25
Configuring Auto-RP 44-26
Configuring PIMv2 BSR 44-30
Using Auto-RP and a BSR 44-34
Monitoring the RP Mapping Information 44-35
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 44-35
Configuring Advanced PIM Features 44-35
Understanding PIM Shared Tree and Source Tree 44-35
Delaying the Use of PIM Shortest-Path Tree 44-37
Modifying the PIM Router-Query Message Interval 44-38