Owners Manual

4. Enter the System Setup.
If the date and time are not correct in the System Setup, replace the battery. If the problem is not resolved by replacing the
battery, see the Getting help section.
NOTE: If the blade is turned off for long periods of time (for weeks or months), the NVRAM may lose its system
configuration information. This situation is caused by a defective battery.
NOTE: Some software may cause the blade time to speed up or slow down. If the blade operates normally except for
the time maintained by the System Setup, the problem may be caused by a software rather than by a defective battery.
Related references
Getting help on page 134
Related tasks
Removing the blade on page 53
Installing a blade on page 55
Replacing the NVRAM backup battery on page 117
Troubleshooting your system 133