Owners Manual

Related tasks
Boot Settings details on page 29
Viewing Boot Settings on page 28
Changing the boot order
About this task
You may have to change the boot order if you want to boot from a USB key or an optical drive. The following instructions may
vary if you have selected BIOS for Boot Mode.
Steps
1. On the System Setup Main Menu screen, click System BIOS > Boot Settings.
2. Click Boot Option Settings > Boot Sequence.
3. Use the arrow keys to select a boot device, and use the plus (+) and minus (-) sign keys to move the device down or up in
the order.
4. Click Exit, and then click Yes to save the settings on exit.
Related references
Boot Settings on page 28
Related tasks
Boot Settings details on page 29
Viewing Boot Settings on page 28
Network Settings
You can use the Network Settings screen to modify PXE device settings. The network settings option is available only in the
UEFI mode.
NOTE:
The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode, the optional Boot ROM of
the network controllers handles the network settings.
Related references
Network Settings screen details on page 31
System BIOS on page 26
Related tasks
Viewing Network Settings on page 30
Viewing Network Settings
To view the Network Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
30
Pre-operating system management applications