Owners Manual

Installing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Ensure that no tools or parts are left inside the blade.
Steps
1. Align the alignment guide on the system cover with the alignment guide on the chassis.
2. Lower the cover onto the chassis.
3. Slide the cover until it clicks into position.
A properly seated cover is flush with the surface of the chassis.
Figure 10. Installing the system cover
1.
alignment guides on the system cover and the chassis 2. system cover
3. release button 4. I/O connector cover
Next steps
Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 52
Related tasks
Removing the system cover on page 56
Installing and removing blade components
57