Owners Manual

Figure 25. Removing the optional IDSDM card
1.
IDSDM card 2. screw (2)
3. SD card slot bracket 4. mezzanine card support bracket
5. IDSDM card connector on the system board 6. standoff (2)
Next steps
1. Install the IDSDM card.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 52
Related tasks
Installing the optional IDSDM card on page 76
Before working inside your system on page 52
Replacing the internal USB key on page 74
Replacing an SD card on page 72
After working inside your system on page 53
Installing the optional IDSDM card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the IDSDM card to replace a faulty IDSDM card or service other components inside the system.
1. Follow the safety guidelines listed in safety instructions section.
76
Installing and removing blade components