Dell PowerEdge M1000e, M915, M910, M820, M710HD, M710, M620, M610x, M610, M520 und M420 Handbuch zum Einstieg Vorschriftenmodell: BMX01, DWHH, HHB, FHB, and QHB Vorschriftentyp: DWHH Series, HHB Series, FHB Series, and QHB Series
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie den Computer besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht aufmerksam auf mögliche Beschädigung der Hardware oder Verlust von Daten bei Nichtbefolgung von Anweisungen. WARNUNG: Durch eine WARNUNG werden Sie auf Gefahrenquellen hingewiesen, die materielle Schäden, Verletzungen oder sogar den Tod von Personen zur Folge haben können.
Installation und Konfiguration WARNUNG: Lesen Sie vor der Ausführung der folgenden Schritte die mit dem Blade-Server oder Gehäuse mitgelieferten Sicherheitshinweise. Auspacken des Systems Packen Sie Ihren Blade-Server oder Ihr Gehäuse aus, machen Sie sich mit dem Verpackungsinhalt vertraut und prüfen Sie ihn auf Vollständigkeit. Installieren der Schienen und des Gehäuses Abbildung 1.
Abbildung 2. Installieren einer Fassung ANMERKUNG: Stellen Sie vor der Installation oder der Entnahme einer Fassung aus dem Gehäuse sicher, dass der oberste Steckplatz der Fassung (Blade a) leer ist. Sie können ein Blade im obersten Steckplatz (Blade a) installieren, nachdem Sie die Fassung im Gehäuse installiert haben. Schieben Sie die Fassung ins Gehäuse und heben Sie den Griff der Fassung in die obere Position, um sie im Gehäuse zu befestigen.
Abbildung 4. Installieren eines Blade mit halber Bauhöhe ANMERKUNG: Die obere Abbildung zeigt das Installieren eines Blade mit halber Bauhöhe. Die Vorgehensweise bei der Installation eines Blade mit voller Bauhöhe entspricht der eines Blade mit halber Bauhöhe. Beginnen Sie oben mit dem Einsetzen der Blades und schieben Sie sie von links nach rechts in das Gehäuse. Wenn das Blade korrekt im Gehäuse installiert ist, kehrt der Griff in die geschlossene Position zurück.
Anschließen des Systems an die Stromversorgung Abbildung 6. Anschließen der Stromversorgung an das System Verbinden Sie die Netzstromkabel mit den Systemnetzteilen. VORSICHT: Befestigen Sie jedes Netzstromkabel in der Kunststoffklammer am Netzteil und mit dem Streifen am Zugentlastungsbügel, damit sich das Kabel nicht versehentlich lösen kann. VORSICHT: Schließen Sie die Netzstromkabel nicht direkt an eine Steckdose an; Sie müssen einen Stromverteiler verwenden.
Einschalten der Blades Abbildung 8. Einschalten eines Blade Drücken Sie an jedem Blade den Ein/Aus-Schalter oder schalten Sie die Blades über die Systemverwaltungssoftware ein. Fertigstellen des Betriebssystem-Setups Wenn Sie ein vorinstalliertes Betriebssystem erworben haben, lesen Sie die zusammen mit dem System gelieferte Dokumentation zum Betriebssystem.
• Alle im Lieferumfang des Systems enthaltenen Medien mit Dokumentationen und Hilfsmitteln zur Konfiguration und Verwaltung des Systems, insbesondere in Bezug auf Betriebssystem, Systemverwaltungssoftware, SystemUpdates und mit dem System erworbene Komponenten. ANMERKUNG: Wenn auf der Website support.dell.com/manuals aktualisierte Dokumente vorliegen, lesen Sie diese immer zuerst, denn frühere Informationen werden damit gegebenenfalls ungültig.
Technische Daten ANMERKUNG: Weitere technische Daten finden Sie im Benutzerhandbuch des Systems.
Abmessungen und Gewicht – Blades PowerEdge M710 und M610x Höhe 38,5 cm Breite 5 cm Tiefe 48,6 cm Gewicht (maximal) 11,1 kg PowerEdge M710HD und M620 Höhe 18,9 cm Breite 5 cm Tiefe 48,6 cm Gewicht (maximal) 7,4 kg PowerEdge M610 Höhe 18,9 cm Breite 5 cm Tiefe 48,6 cm Gewicht (maximal) 5,2 kg bis 6,4 kg PowerEdge M520 Höhe 18,9 cm Breite 5 cm Tiefe 48,6 cm Gewicht (maximal) 6,4 kg PowerEdge M420 Fassung Höhe 39,5 cm Breite 5 cm Tiefe 44,3 cm Gewicht 3 kg Blade Höhe 9,7
Abmessungen und Gewicht – Gehäuse Tiefe 75,5 cm Gewicht (maximal) 200,5 kg Gewicht (leer) 44,6 kg Umgebungsbedingungen ANMERKUNG: Weitere Informationen zu Umgebungsbedingungen bei verschiedenen Systemkonfigurationen finden Sie unter dell.com/environmental_datasheets. Temperatur: Während des Betriebs Längerer Betrieb: 10 °C bis 35 °C bei 10 % bis 80 % relativer Luftfeuchtigkeit (RH), mit einem maximalen Taupunkt von 26 °C.
Umgebungsbedingungen Klasse 12 G1 gemäß ISA-S71.