Computer Hardware User Manual
Table Of Contents
- Contents
- About Your System
- Using The System Setup And Boot Manager
- Installing Blade Components
- Recommended Tools
- Removing And Installing A Blade
- Opening And Closing The Blade
- Inside The Blade
- Cooling Shroud
- System Memory
- I/O Module Mezzanine Cards
- Management Riser Card
- SD vFlash Card
- Network Daughter Card/LOM Riser Card
- Processors
- Hard Drives/SSDs
- Hard-Drive/SSD Backplane
- System Board
- NVRAM Backup Battery
- Storage Controller Card
- Troubleshooting Your System
- Using System Diagnostics
- Jumpers And Connectors
- Technical Specifications
- System Messages
- Getting Help
Error Code Message Information
Details System performance may be degraded or the system may fail to operate.
Action If removal was unintended, check presence and reinstall.
HWC1001
Message The <
name
> is absent.
LCD Message The <
name
> is absent. Check hardware.
Details The absent device may be necessary for proper operation. System functionality may be
degraded.
Action Reinstall or reconnect the hardware.
HWC1002
Message The <
name
> is disabled.
Action If device disabled unexpectedly, re-enable device.
HWC1005
Message The storage adapter is absent.
LCD Message The storage adapter is absent. Check hardware.
Details The storage adapter may be necessary for proper operation. System functionality may
be degraded.
Action Install storage adapter.
HWC1006
Message The storage adapter is disabled.
Action If adapter disabled unexpectedly, re-enable the storage adapter.
HWC1009
Message The backplane is absent.
LCD Message The backplane is absent. Check hardware.
Details The backplane may be necessary for proper operation. System functionality may be
degraded.
Action If removal was unintended, check presence, then reinstall or reconnect.
HWC1010
Message The backplane is disabled.
Action If disabled unexpectedly, re-enable backplane.
HWC1015
Message The mezzanine card <
number
> is absent.
Details The mezzanine card may be necessary for proper operation. System functionality may be
degraded.
Action If removal was unintended, check presence, then reinstall or reconnect.
HWC2006
Message The <
name
> is not installed correctly.
LCD Message The <
name
> is not installed correctly. Check connection.
88