Computer Hardware User Manual
Table Of Contents
- Contents
- About Your System
- Using The System Setup And Boot Manager
- Installing Blade Components
- Recommended Tools
- Removing And Installing A Blade
- Opening And Closing The Blade
- Inside The Blade
- Cooling Shroud
- System Memory
- I/O Module Mezzanine Cards
- Management Riser Card
- SD vFlash Card
- Network Daughter Card/LOM Riser Card
- Processors
- Hard Drives/SSDs
- Hard-Drive/SSD Backplane
- System Board
- NVRAM Backup Battery
- Storage Controller Card
- Troubleshooting Your System
- Using System Diagnostics
- Jumpers And Connectors
- Technical Specifications
- System Messages
- Getting Help

• The
Getting Started Guide
provides an overview of system features, setting up your system, and technical
specifications.
• The
Rack Installation Instructions
included with your rack solution describes how to install your system into a
rack.
• The
Dell PowerEdge M1000e Enclosure Owner’s Manual
provides information about enclosure features and
describes how to troubleshoot the enclosure and install or replace the enclosure's components.
• The
Dell Chassis Management Controller User’s Guide
provides information on installing, configuring and using
the Chassis Management Controller (CMC).
• For the full name of an abbreviation or acronym used in this document, see the Glossary at support.dell.com/
manuals.
• Dell systems management application documentation provides information about installing and using the
systems management software.
• Any media that ships with your system that provides documentation and tools for configuring and managing your
system, including those pertaining to the operating system, system management software, system updates, and
system components that you purchased with your system.
NOTE: Always check for updates on support.dell.com/manuals and read the updates first because they often
supersede information in other documents.
9