Computer Hardware User Manual
Table Of Contents
- Contents
- About Your System
- Using The System Setup And Boot Manager
- Installing Blade Components
- Recommended Tools
- Removing And Installing A Blade
- Opening And Closing The Blade
- Inside The Blade
- Cooling Shroud
- System Memory
- I/O Module Mezzanine Cards
- Management Riser Card
- SD vFlash Card
- Network Daughter Card/LOM Riser Card
- Processors
- Hard Drives/SSDs
- Hard-Drive/SSD Backplane
- System Board
- NVRAM Backup Battery
- Storage Controller Card
- Troubleshooting Your System
- Using System Diagnostics
- Jumpers And Connectors
- Technical Specifications
- System Messages
- Getting Help
Error Code Message Information
Action Review System Log or front panel for additional information.
HWC7008
Message Server <
number
> health changed to a warning state from more severe state. Server
<
number
> health changed to a critical state from a non-recoverable state.
Details Server <
number
> health changed to a warning state from a normal state.
Action Review System Log or front panel for additional information.
HWC7010
Message Server <
number
> health changed to a critical state from a nonrecoverable state.
Details Server <
number
> health changed to a warning state from a normal state.
Action Review System Log or front panel for additional information.
HWC7012
Message Server <
number
> health changed to a nonrecoverable state.
Details Server <
number
> health changed to a warning state from a normal state.
Action Review System Log or front panel for additional information.
LNK2700
Message The <
name
> LAN heartbeat is lost.
Details CMC has lost network connection.
Action Check network cable and network connections.
MEM0000
Message Persistent correctable memory errors detected on a memory device at location(s)
<
location
>.
Details This is an early indicator of a possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help .
MEM0001
Message Multi-bit memory errors detected on a memory device at location(s) <
location
>.
LCD Message Multi-bit memory error on <
location
>. Re-seat memory.
Details The memory module has encountered a uncorrectable error. System performance may
be degraded. The operating system and/or applications may fail as a result.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM0002
Message Parity memory errors detected on a memory device at location <
location
>.
Details The memory is operational. This an early indicator of a possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM0003
Message Stuck bit memory error detected on a memory device at location <
location
>.
Details This is an early indicator of a possible future uncorrectable error.
92