Dell PowerEdge M1000e, M915, M910, M820, M710HD, M710, M620, M610x, M610, M520 ve M420 Başlangıç Kılavuzu Resmi Model: BMX01, DWHH, HHB, FHB, and QHB Resmi Tip: DWHH Series, HHB Series, FHB Series, and QHB Series
Notlar, Dikkat Edilecek Noktalar ve Uyarılar NOT: NOT, bilgisayarınızı daha iyi kullanmanızı sağlayan önemli bilgileri anlatır. DİKKAT: DİKKAT, donanımda olabilecek hasarları ya da veri kaybını belirtir ve bu sorunun nasıl önleneceğini anlatır. UYARI: UYARI, meydana gelebilecek olası maddi hasar, kişisel yaralanma veya ölüm tehlikesi anlamına gelir. © 2013 Dell Inc.
Kurulum ve Yapılandırma UYARI: Bir sonraki yordamı uygulamadan önce, blade sunucu veya kasayla birlikte gelen güvenlik yönergelerini inceleyin. Sistemi Paketinden Çıkarma Blade sunucunuzu veya kasayı paketinden çıkarın ve her bir öğeyi tanımlayın. Rayları ve Kasayı Takma Rakam 1. Kasayı Rafa Takma Kasanızla birlikte verilen aşağıdaki güvenlik yönergelerini ve raf montaj yönergelerini izleyerek rayları takın ve kasayı rafa monte edin.
Rakam 2. Manşonu Takma NOT: Bir manşonu kasaya takmadan veya kasadan çıkarmadan önce manşondaki en üst yuvanın (Blade a) boş olduğundan emin olun. Manşonu kasaya taktıktan sonra blade'i en üst yuvaya (Blade a) takabilirsiniz. Manşon tutacağından turuncu kılıfı çıkarın. Manşonu kasaya kaydırın ve manşon tutacağını yukarı doğru çekerek manşonu kasaya sabitleyin. NOT: İdeal termal performansı sağlamak için, manşon kasaya takıldıktan sonra kılıfı manşon tutacağının üzerine yeniden yerleştirmeyin.
Rakam 4. Yarım Yükseklikteki Blade'i Takma NOT: Yukarıdaki şekilde yarım yükseklikteki blade'in takılışı gösterilmektedir. Tam yükseklikteki blade'in takılışı ile yarım yükseklikteki blade'in takılışı aynıdır. Üst taraftan başlayarak blade'leri soldan sağa doğru kasanın içine doğru kaydırın. Blade güvenli biçimde takıldığında blade kolu kapalı konuma geri döner. CMC ve iKVM Modüllerini Bağlama Rakam 5. Modülleri Bağlama Seri kabloyu ve ağ kablolarını yönetim sisteminden CMC modülüne bağlayın.
Sistemi Güce Bağlama Rakam 6. Gücü Sisteme Bağlama Sistemin güç kablolarını sistemin güç kaynaklarına bağlayın. DİKKAT: Güç kablolarının yanlışlıkla çıkmasını önlemek için güç kablosunu güç kaynağına bağlamak üzere her güç kaynağının üzerindeki plastik klipsi, güç kablosunu gerilme önleyici çubuğa sabitlemek için ise şeridi kullanın. DİKKAT: AC güç kaynağı için, güç kablolarını doğrudan güç çıkışına bağlamayın. Mutlaka PDU kullanın. Sistemin en iyi şekilde çalışması için en az üç güç kaynağı gereklidir.
Blade'leri Açma Rakam 8. Blade'i Açma Her blade'in üzerindeki güç düğmesine basın veya blade'leri sistem yönetim yazılımını kullanarak açın. İşletim Sistemi Kurulumunun Tamamlanması Önceden yüklenmiş işletim sistemi aldıysanız, işletim sistemiyle ilgili belgelere bakın. İşletim sisteminin ilk kurulumu için işletim sisteminize yönelik kurulum ve yapılandırma belgelerine bakın. Sistem ile birlikte satın alınmayan donanım veya yazılımı kurmadan önce işletim sistemini kurun.
NOT: Sisteminizi yükseltirken,support.dell.com adresinden en son BIOS'u, sürücüleri ve sistem yönetimi ürün yazılımını sisteminize indirip kurmanız önerilir. Teknik Yardım Alma Bu kılavuzdaki bir prosedürü anlamazsanız veya sistem beklediğiniz gibi çalışmazsa Kullanıcı El Kitabı'na bakın. Dell kapsamlı donanım eğitimi ve sertifikasyonu sunar. Daha fazla bilgi almak için bkz. dell.com/training. Bu hizmet tüm bölgelerde sunulmamaktadır.
Güç — Kasa AC/DC güç kaynağı (güç kaynağı modülü başına) (2360 W ve 2700 W) Watt değeri 2360 W ve 2700 W Konektör IEC C20 Isı dağıtımı 1205 BTU/saat (maksimum) Maksimum ani akım Normal hat koşulları altında ve sistemin ortam çalışma aralığının üzerinde, ani akım 10 ms veya daha kısa bir süre için güç kaynağı başına 55 A'ya ulaşabilir AC/DC güç kaynağı (güç kaynağı modülü başına) (3000 W) Watt değeri 3000 W Konektör IEC 320 Isı dağıtımı 1200 BTU/sa (maksimum) NOT: Isı dağıtımı güç kaynağının Wa
Fiziksel — Blade'ler Yükseklik 38,5 cm (15,2 inç) Genişlik 5 cm (2 inç) Derinlik 48,6 cm (19,2 inç) Ağırlık (maksimum) 13,1 kg (29 lb) PowerEdge M820 Yükseklik 38,5 cm (15,2 inç) Genişlik 5 cm (2 inç) Derinlik 48,6 cm (19,2 inç) Ağırlık (maksimum) 14,5 kg (31,9 lb) PowerEdge M710 ve M610x Yükseklik 38,5 cm (15,2 inç) Genişlik 5 cm (2 inç) Derinlik 48,6 cm (19,2 inç) Ağırlık (maksimum) 11,1 kg (24,5 lb) PowerEdge M710HD ve M620 Yükseklik 18,9 cm (7,4 inç) Genişlik 5 cm (2 inç) Der
Fiziksel — Blade'ler Blade Yükseklik 9,75 cm (3,8 inç) Genişlik 5 cm (2 inç) Derinlik 45,8 cm (18 inç) Ağırlık (maksimum) 2,3 kg (5,07 lb) Fiziksel — Kasa Yükseklik 44,0 cm (17,3 inç) Genişlik 44,7 cm (17,6 inç) Derinlik 75,5 cm (29,7 inç) Ağırlık (maksimum) 200,5 kg (442 lb) Ağırlık (boş durumda) 44,6 kg (98,1 lb) Çevre NOT: Belirli sistem yapılandırmalarına yönelik çevre ölçümleri hakkında ek bilgi için, bkz. dell.com/ environmental_datasheets.
Çevre Çalışma 3048 m (10,000 fit). Depolama 12.000 m (39.370 fit). Çalışma İrtifası Oranı Azalması 35 °C'ye (95 °F) kadar. 950 m (3,117 fit) üzerinde maksimum sıcaklık 1 °C/300 m (1 °F/547 fit) oranında düşürülür. 35 °C - 40 °C (95 °F - 104 °F) 950 m (3.117 fit) üzerinde maksimum sıcaklık 1 °C/175 m (1 °F/319 fit) oranında düşürülür. 40 °C - 45 °C (104 °F - 113 °F) 950 m (3.117 fit) üzerinde maksimum sıcaklık 1 °C/125 m (1 °F/228 fit) oranında düşürülür.