Einrichten Ihres Dell PowerEdge-Servers unter Verwendung von Dell Lifecycle Controller Februar 2021 Rev.
Hinweise, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können. WARNUNG: Mit WARNUNG wird auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen kann. © 2016 Dell Inc. Alle Rechte vorbehalten.
Inhaltsverzeichnis Kapitel 1: ....................................................................................................................................... 4 Einrichten Ihres Dell PowerEdge-Servers unter Verwendung von Dell Lifecycle Controller....................................... 4 Verwandte Dell-Produkte...............................................................................................................................................
1 Themen: • Einrichten Ihres Dell PowerEdge-Servers unter Verwendung von Dell Lifecycle Controller Einrichten Ihres Dell PowerEdge-Servers unter Verwendung von Dell Lifecycle Controller Dell Lifecycle Controller ist eine erweiterte integrierte Systemverwaltung-Technologie, die Remote-Serververwaltung unter Verwendung vom integrierten Dell Remote Access Controller (iDRAC) ermöglicht.
ANMERKUNG: Wenn Sie F10 nicht gedrückt haben, starten Sie den Server neu und drücken Sie F10. ANMERKUNG: Der Assistent für das erstmalige Setup wird nur beim erstmaligen Starten von Lifecycle Controller angezeigt. 3. Wählen Sie die Sprache und den Tastaturtyp aus, und klicken Sie auf Weiter. Abbildung 3. Seite Auswahl von Sprache und Tastatur 4. Lesen Sie die Produktübersicht, und klicken Sie auf Weiter. Abbildung 4. Produktübersicht-Seite 5.
Abbildung 5. Seite Lifecycle Controller-Netzwerkeinstellungen 6. Konfigurieren Sie die iDRAC-Netzwerkeinstellungen, warten Sie deren Anwendung ab, und klicken Sie anschließend auf Weiter. Abbildung 6. Seite „Konfiguration des iDRAC-Netzwerks und der Anmeldeinformationen“ 7. Überprüfen Sie die angewendeten Netzwerkeinstellungen, und klicken Sie auf Fertigstellen, um den Assistenten für das erstmalige Setup zu beenden.
Abbildung 7. Zusammenfassungsseite ANMERKUNG: Der Assistent für das erstmalige Setup wird nur beim erstmaligen Starten von Lifecycle Controller angezeigt. Wenn Sie Konfigurationsänderungen später vornehmen möchten, starten Sie den Server neu, drücken Sie F10, um Lifecycle Controller zu starten und wählen Sie Einstellungen oder System-Setup auf der Lifecycle Controller-Startseite aus. 8.
Abbildung 9. Seite BS-Bereitstellung ANMERKUNG: Videos zu iDRAC mit Lifecycle Controller finden Sie unter Delltechcenter.com/idrac. ANMERKUNG: Dokumentation zu iDRAC mit Lifecycle Controller finden Sie unter www.dell.com/idracmanuals. Verwandte Dell-Produkte Integrated Dell Remote Access Controller mit Lifecycle Controller Integrierter Dell Remote Access Controller (iDRAC) mit Lifecycle Controller verbessert Ihre Produktivität und die allgemeine Verfügbarkeit von Dell Servern.
OpenManage Server Administrator (OMSA)/OpenManage Storage Services (OMSS) OMSA ist eine umfangreiche Eins-zu-Eins-Systems Management-Lösung für lokale und Remote-Server, zugeordnete Speicher-Controller und Direct Attached Storage (DAS). OMSA umfasst OMSS, mit dem die Konfiguration von Speicherkomponenten ermöglicht wird, die an den Server angeschlossen sind. Diese Komponenten umfassen RAID- und Nicht-RAID-Controller und Kanäle, Anschlüsse, Gehäuse und Festplatten, die an den Speicher angeschlossen sind.