Servicios remotos de Dell Lifecycle Controller v2.30.30.
Notas, precauciones y avisos NOTA: Una NOTA proporciona información importante que le ayuda a utilizar mejor su equipo. PRECAUCIÓN: Una PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos, y le explica cómo evitar el problema. AVISO: Un mensaje de AVISO indica el riesgo de daños materiales, lesiones corporales o incluso la muerte. © 2016 Dell Inc. Todos los derechos reservados.
Tabla de contenido 1 Introducción.......................................................................................................... 5 Razones para utilizar Lifecycle Controller ...........................................................................................5 Ventajas de utilizar iDRAC con Lifecycle Controller ...........................................................................6 Funciones clave..........................................................................................
Actualización del firmware ...........................................................................................................22 Reemplazo de piezas ................................................................................................................... 22 Perfil del servidor: exportar o importar........................................................................................ 22 Licencia del servidor: importación......................................................................
Introducción 1 Dell Lifecycle Controller proporciona administración avanzada de sistemas integrados para realizar tareas de administración de sistemas como, por ejemplo, implementar, configurar, actualizar, mantener y diagnosticar. Se entrega como parte de la solución fuera de banda Integrated Dell Remote Access Controller (iDRAC) y de las aplicaciones integradas de Unified Extensible Firmware Interface (UEFI) en los servidores Dell más recientes.
Dell Lifecycle Controller simplifica la administración del ciclo de vida del servidor, desde el aprovisionamiento, la implementación, la aplicación de parches y las actualizaciones hasta el mantenimiento y la personalización del usuario de forma local y remota. Lifecycle Controller incluye un almacenamiento administrado y persistente que incorpora características de administración de sistemas y de controladores de dispositivos del sistema operativo directamente en el servidor.
• Exportar e importar los perfiles de configuración del servidor • Programar y realizar un seguimiento del estado de la actualización y de la configuración • Importar y exportar el archivo de perfiles de configuración del servidor que contiene información acerca de la configuración de un componente • Supervisión del rendimiento del servidor fuera de banda • Mejorar la seguridad a través de la contraseña de hash • Ver registros e información de supervisión y del servidor y configurar los parámetro
¿Por qué usar Servicios remotos de Lifecycle Controller? Cuando Dell evaluó la mayoría de las tareas comunes de administración y las deficiencias asociadas con ellas, descubrió que el tiempo adicional que tarda la realización de tareas de administración no se debe a las herramientas sino a la forma en que las funciones se dividen entre distintas herramientas.
¿Desde dónde se puede usar la API de Lifecycle Controller? Servicios remotos de Lifecycle Controller es una interfaz basada en normas que les permite a las consolas integrar, por ejemplo, aprovisionamiento completo e implementaciones de sistemas operativos de uno a muchos para servidores de ubicaciones remotas.
¿Cómo se logra la administración de uno a varios? Una estación de administración envía comandos de WS-MAN a través de una red y los comandos de WSMAN pasan en forma segura a través de la red desde fuera del servidor de seguridad y mantienen la seguridad. Otra información útil Además de esta guía, puede consultar las siguientes guías disponibles en dell.com/support/home o dell.
• La sección "Sistemas Dell y sistemas operativos compatibles con Lifecycle Controller" de la Matriz de compatibilidad de software de los sistemas Dell incluye la lista de los sistemas Dell y los sistemas operativos que se pueden implementar en los sistemas de destino. • La Guía del usuario de la controladora RAID Dell PowerEdge (PERC) 9 proporciona información relacionada con la especificación y la configuración de las controladoras PERC 9.
b. c. En Seleccionar un producto, haga clic en Software y seguridad. En el grupo Software y seguridad, haga clic en el enlace requerido que corresponda: – Enterprise Systems Management – Remote Enterprise Systems Management – Herramientas de servicio – Dell Client Command Suite – Connections Client Systems Management d. • Para ver un documento, haga clic en la versión del producto requerida. Mediante los motores de búsqueda: – Escriba el nombre y la versión del documento en el cuadro buscar.
Funciones de servicios remotos 2 Con Lifecycle Controller Remote Services, es posible realizar las siguientes operaciones: • • • • Implementar y configurar Supervisar Mantener Crear y programar trabajos Implementación y configuración Mediante las diversas capacidades de servicios remotos de Lifecycle Controller es posible realizar diferentes configuraciones en un sistema en todo su ciclo de vida.
básicas de iDRAC. Las propiedades y los atributos de la controladora de acceso remoto se dividen en vistas para proporcionar una metodología simple, a fin de que los clientes consulten las vistas de iDRAC y establezcan los atributos de iDRAC.
• • Hacer parpadear o dejar de hacer parpadear los LED de las unidades de discos físicos incluidas en el disco virtual. Crear, modificar o eliminar la clave de seguridad mediante la función Administración de clave local (LKM) en las controladoras que admiten el cifrado de unidades. NOTA: En el servidor PowerEdge de 13.ª generación de Dell se puede realizar todos los trabajos de configuración de RAID en tiempo real sin reiniciar el host.
• Descargar ISO a la tarjeta vFlash SD y arrancar desde la tarjeta para iniciar la instalación del sistema operativo. • Conectar una ISO desde un recurso compartido de red CIFS o NFS como un dispositivo virtual USB CD-ROM al servidor e inicie el servidor en la ISO cada vez que este se reinicia. • Inicio único en PXE. • Inicio único en disco duro. • Obtener la lista de direcciones MAC de todas las NIC presentes en el servidor. • Implementar el sistema operativo en la LUN de iSCSI y FCoE.
La contraseña de hash puede generarse con o sin Salt mediante SHA256. Si se usa la cadena Salt o esta es nula, siempre debe establecerse junto con SHA256SystemPassword. NOTA: Si la contraseña de la cuenta de usuario del iDRAC está establecida solo con el hash de contraseña SHA256 (SHA256Password) y no con los demás valores hash (SHA1v3Key, MD5v3Key), se pierde la autentificación a través de SNMPv3.
reinicio del sistema. Además, la recopilación de inventario del sistema también detecta cambios de hardware. Si la función Reemplazo de piezas está activada y CSIOR detecta que se reemplaza el hardware administrado, Lifecycle Controller restaura la configuración y el firmware anteriores en el dispositivo recién instalado en función del inventario recopilado durante el reinicio del sistema anterior.
Registro de Lifecycle Los registros de Lifecycle contienen anotaciones para configuración y actualizaciones de firmware de BIOS, controladoras de almacenamiento, LOM y tarjetas NIC complemento, en caso de ser compatibles. El registro de Lifecycle se puede exportar a un recurso compartido de red o guardarse en una unidad USB. La interfaz web del iDRAC, RACADM y la interfaz de WS-MAN permiten acceder al registro de Lifecycle.
Sucesos de alerta Es posible establecer alertas y acciones para ciertos sucesos que se producen en un sistema administrado. Un suceso se produce cuando el estado de un componente del sistema ha cambiado con respecto a la condición definida anteriormente. Si un suceso coincide con un filtro de sucesos y este filtro está configurado para generar una alerta (correo electrónico, captura SNMP o alerta de IPMI), se envía una alerta a uno o varios destinos configurados.
de firmware, reemplazo de piezas, importación o exportación del perfil del servidor y servidor de aprovisionamiento para mantener un sistema mediante Lifecycle Controller Remote Services. Perfiles de configuración del servidor: exportar o importar Servicios remotos de Lifecycle Controller puede exportar o importar un archivo de los perfiles de configuración del servidor.
• Habilitación de ranuras PCI: las ranuras para tarjetas PCI en el sistema que están deshabilitadas en el BIOS requieren dos importaciones, una para habilitar la ranura y otra para configurar la tarjeta en la ranura. Ejemplo Si el atributo de BIOS de la Ranura1 en el sistema de importación está deshabilitado, la primera importación debe contener lo siguiente: PAGE 23La función de exportación recopila información del sistema, imágenes de firmware, configuración de hardware, configuración de Lifecycle Controller, firmware y configuración de la iDRAC y almacena la información en un único archivo en la tarjeta SD vFlash local o en un recurso compartido de red remoto. La función de importación aplica las configuraciones guardadas en un sistema desde la tarjeta SD vFlash local o desde un recurso compartido de red.
La información del usuario se eliminará permanentemente y no se puede recuperar la información. Sin embargo, el BIOS y la iDRAC permanecen funcionales, mientras que los diagnósticos y el paquete de controladores se pueden volver a instalar. Administración del certificado de servidor web De manera predeterminada, un certificado autofirmado está disponible en la iDRAC.
Es posible ejecutar un único trabajo o un arreglo de trabajos de inmediato o programarlos para que se ejecuten más tarde. Los diversos trabajos se muestran en el orden de la secuencia de ejecución. Si un sistema se debe reiniciar a la hora de inicio programada, se debe agregar un trabajo de reinicio a la lista de trabajos.
Completado y comienza la sincronización. Después de que la sincronización se haya completado correctamente, el sistema se encuentra en el estado Listo.
Introducción a API colateral y vínculos 3 La introducción a cualquier función de Lifecycle Controller comienza en la página de inicio de Dell Tech Center Lifecycle Controller: delltechcenter.com/LC. La página de inicio contiene diversas secciones que hacen referencia a las URL que son los vínculos directos a las correspondientes secciones. Puede seguir estos pasos para comenzar mediante la API de Lifecycle Controller: 1. Identifique la función o la operación de administración requerida. 2.
Nombre del perfil Descripción Propiedad física y servidor base Base Server Profile es el perfil autónomo que define las clases utilizadas para describir hardware básico de servidores y su software relacionado. BIOS y la administración de inicio BIOS and Boot Management Profile extiende las capacidades de administración de perfiles de referencia agregando la capacidad para representar la configuración del BIOS del sistema y para administrar el inicio del sistema.
Nombre del perfil Descripción El método ExportCertificate () se utiliza para exportar certificados de SSL generados en forma exclusiva desde Lifecycle Controller a un archivo en la ubicación de recurso compartido remoto. El método DCIM_LCService. ExportHealthReport () se utiliza para recopilar el EHR. Es decir, hardware, sistemas operativos y datos de aplicaciones, comprimir el archivo zip y, a continuación, guardarlo en la ruta de acceso del recurso compartido remoto correspondiente (cifs/nfs).
Nombre del perfil Descripción Almacenamiento persistente Persistent Storage Profile extiende las capacidades de administración de perfiles de referencia agregando la capacidad para representar y administrar las particiones en los soportes flash virtuales en plataformas de Dell. Visualización del Este perfil incluye una especificación de la visualización del sistema del equipo sistema del equipo físico, métodos extrínsecos para operaciones de administración y sus relaciones físico asociadas.
Nombre del perfil Descripción Autorización basada en funciones DCIM Role Based Authorization Profile describe las propiedades e interfaces para la ejecución de tareas de administración del sistema relacionadas con la autorización. Sensores DCIM Sensors Profile describe las propiedades e interfaces para la ejecución de tareas de administración de sistemas relacionadas con la administración de sensores en un sistema.
Nombre del perfil Descripción QuickSync del sistema El documento del perfil QuickSync del sistema DCIM describe las propiedades e interfaces utilizadas para tareas de administración del sistema relacionadas con la administración de dispositivos NFC o QuickSync dentro de un sistema. Dispositivo USB El perfil Dispositivo USB de DCIM describe las propiedades e interfaces para las tareas de administración del sistema relacionadas con los dispositivos USB de un sistema.
NOTA: Para acceder al XSD, utilice el vínculo en.community.dell.com/dell-groups/dtcmedia/m/ mediagallery/20074445.aspx Guía de la interfaz de servicios web La Guía de la interfaz de servicios web (WSIG) sirve a modo de instrucción para utilizar la funcionalidad disponible desde las interfaces integradas de servicios web de Servicios remotos de Lifecycle Controller.
XML de registro de mensajes de sucesos El XML de registro de mensajes describe todos los mensajes, identificaciones de mensajes y argumentos de mensajes de todos los perfiles. Este archivo comprimido contiene los datos de mensajes de los sucesos y errores de iDRAC y Lifecycle Controller en XML, de conformidad con el esquema de XML de registros de mensajes DMTF DSP0228. El archivo comprimido incluye también un archivo XSL provisto por Dell que facilita la búsqueda y la lectura de contenido.
Tabla 3.
Integración de la API de Lifecycle Controller 4 Esta sección define los recursos requeridos para integrar la API de Lifecycle Controller en una aplicación: • Clientes de API: muestra los clientes de API que están disponibles para admitir WinRM o WSMAN. Los clientes de API permiten crear una aplicación en una variedad de lenguajes de programación.
ejecutar un único comando en un servidor o ejecutar comandos por lote para automatizar la secuencia de operaciones. • Entorno interactivo de Recite: en.community.dell.com/techcenter/systems-management/w/wiki/ 3757.recite-interactive-ws-man-scripting-environment.aspx • Otros ejemplos de secuencias de comandos: en.community.dell.com/techcenter/systemsmanagement/w/wiki/1981.scripting-the-dell-lifecycle-controller.
OpenWSMAN CLI es un cliente Linux WS-MAN de código fuente abierto. El código fuente abierto de OpenWSMAN CLI y la información de instalación se encuentran disponibles en openwsman.github.io/.
Referencia de medios sociales 5 Para obtener la información más actualizada, vaya a Dell Tech Center y busque la información necesaria. Tabla 4. Información de producto Nombre de producto y tema Enlace en Dell TechCenter Lifecycle Controller en.community.dell.com/techcenter/systems-management/w/wiki/ 1979.lifecycle-controller.aspx Integrated Dell Remote Access Controller (iDRAC) en.community.dell.com/techcenter/systems-management/w/wiki/ 3204.dell-remote-access-controller-drac-idrac.
Términos y definiciones 6 La siguiente tabla muestra los términos utilizados en este documento y sus definiciones. Tabla 5. Términos y definiciones Término Definición LC Lifecycle Controller Enumerar Hace referencia a la operación WS-MAN ENUMERATE como se describe en la sección 8.2 de DSP0226_V1.1 y en la sección 9.1 de DSP0227_V1.0 Get Hace referencia a la operación WS-MAN GET como se describe en la sección 7.3 de DSP00226_V1.1 y en la sección 7.1 de DSP0227_V1.