Owners Manual

3. Push the drive carrier into the slot until the handle makes contact with the server module.

4. Rotate the carrier handle to the closed position while pushing the carrier into the slot until it locks into place.

The status LED indicator displays a steady green light if the drive is installed correctly. The drive carrier LED green indicator

flashes as the drive rebuilds.

Figure 44. Installing a hard drive

1. release button 2. hard drive(on backplane)

3. hard drive 4. hard drive carrier handle

Figure 45. Installing an SSD

a. release button

b. SSD

c. SSD carrier handle

Next steps

Follow the procedure listed in the After working inside your system section.

Related references

Safety instructions on page 53

Installing and removing server module components