CLI Guide

GroupManager
Table 59. Details of GroupManager
Description
Allows you to:
• Delete the group from the group manager.
• Remove the iDRAC from group by itself by using admin previleges.
• Join the group using administrator privileges.
NOTE: This subcommand is supported only on iDRAC9.
Synopsis
• To delete the group from the group manager.
groupmanager delete –g <groupname>
• To remove the iDRAC from group by itself by using administrator privileges.
groupmanager removeself –g <groupname>
• To join the group using administrator privileges.
groupmanager joingroup -g <groupname> -uid <uuid> -pcode < grouppasscode>
Input
• -g— Specifies the name of the iDRAC member group
• -uid — Specifies the group user id
• -pcode— Specifies the group passcode
Example
• To delete the group from the groupmanager:
racadm groupmanager delete –g <groupname>
• To remove the iDRAC from the group by itself:
racadm groupmanager removeself –g <groupname>
• To join server to the local iDRAC group:
racadm groupmanager joingroup -g <mygrpxyz> -uid <uid1234> -pcode <12345>
hwinventory
Table 60. Details of hwinventory
Description Allows you to display or export current internal hardware inventory or shipped hardware inventory by device.
NOTE: iDRAC supports a maximum of 12 parallel sessions of hardware inventory.
Synopsis
• racadm hwinventory
• racadm hwinventory NIC|FC
•
racadm hwinventory <FQDD>
• racadm hwinventory export -f <filename> -u <username> -p <password> -l <CIFS,
NFS, HTTP, or HTTPS share>
Input
• <FQDD> — Specifies the FQDD of the target device.
• FQDD — NIC.Slot.1–2
NOTE: The hwinventory subcommand supports NIC and FC FQDDs only.
•
-f — Exported Hardware Inventory filename.
80 RACADM Subcommand Details