Users Guide
Table Of Contents
- Lifecycle Controller User's Guide
- Introduction
- Using Lifecycle Controller
- Operating system deployment
- Monitor
- Hardware inventory view and export
- About view and export current inventory
- About view and export factory-shipped inventory
- Viewing hardware inventory — current or factory shipped
- Exporting hardware inventory — current or factory shipped
- Viewing or exporting hardware inventory after part replacement
- Viewing or exporting current inventory after resetting Lifecycle Controller
- Lifecycle Controller log
- Firmware update
- Configure
- System control panel access options
- Configuring iDRAC
- Configuring system time and date
- Configuring RAID
- Configuring RAID using software RAID
- Creating a secure virtual disk on a RAID controller
- Key encryption
- Local key encryption mode
- Breaking mirrored drives
- System setup — Advanced Hardware Configuration
- Collect system inventory on restart
- Configuring a local USB drive
- Configuring NFS and CIFS servers
- Conditions while configuring HTTP or HTTPS server
- Maintain
- Easy-to-use system component names
- Using the system setup and boot manager
- Troubleshooting and frequently asked questions
Menu Item Description
System Model
Name
Displays the system model name.
System BIOS
Version
Displays the BIOS version installed on the system.
System Service
Tag
Displays the system Service Tag.
System
Manufacturer
Displays the name of the system manufacturer.
System
Manufacturer
Contact
Information
Displays the contact information of the system manufacturer.
Memory Settings screen
Menu Item
Description
System Memory
Size
Displays the amount of memory installed in the system.
System Memory
Type
Displays the type of memory installed in the system.
System Memory
Speed
Displays the system memory speed.
System Memory
Voltage
Displays the system memory voltage.
Video Memory Displays the amount of video memory.
System Memory
Testing
Specifies whether system memory tests are run during system boot. Options are Enabled and Disabled.
By default, the System Memory Testing option is set to Disabled.
Memory
Operating Mode
Specifies the memory operating mode. The options available are Optimizer Mode, Advanced ECC
Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode, and Dell Fault Resilient Mode.
By default, the Memory Operating Mode option is set to Optimizer Mode.
NOTE: The Memory Operating Mode can have different defaults and available options based on
the memory configuration of your system.
NOTE: The Dell Fault Resilient Mode establishes an area of memory that is fault resilient. This
mode can be used by an operating system that supports the feature to load critical applications or
enables the operating system kernel to maximize system availability.
Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory configuration is installed.
If Disabled, the system supports Non-Uniform Memory architecture (NUMA) (asymmetric) memory
configurations. By default, Node Interleaving option is set to Disabled.
Serial Debug
Output
By default, it is set to disabled.
Processor settings screen
NOTE: Depending on the platform, some attributes may or may not be displayed.
Menu Item Description
Logical Processor Allows you to enable or disable logical processors and display the number of logical processors. If the
Logical Processor option is set to Enabled, the BIOS displays all the logical processors. If this option is
62 Using the system setup and boot manager