Users Guide

Table Of Contents

监测

使用 Lifecycle Controller，您可以在其整个生命周期中监测服务器的硬件资源清册和事件。

主题：

• 硬件资源清册查看和导出

• About view and export current inventory

• 关于查看和导出出厂资源清册

• 查看当前或出厂的硬件资源清册

• 导出硬件资源清册——当前的或出厂配置的

• 在部件更换后查看或导出硬件资源清册

• 重设 Lifecycle Controller 后查看或导出当前资源清册

• Lifecycle Controller 日志

硬件资源清册查看和导出

生命周期控制器提供管理系统资源清册的以下向导：

● View Current Inventory（查看当前资源清册）

● Export Current Inventory（导出当前资源清册）

● View Factory Shipped Inventory（查看出厂资源清册）

● Export Factory Shipped Inventory（导出出厂资源清册）

● 重新启动时收集系统资源清册

About view and export current inventory

You can view information about the installed hardware components that are internal to the system chassis and the configuration for each

component. All the installed hardware components such as fans, PCI devices, NICs, DIMMs, PSU, and their properties and values are

displayed. You can export this information from a JSON file to a USB drive or network share. The JSON file is saved in the following

format: HardwareInventory_<servicetag>_<timestamp>.json.

For more information about the easy-to-use names of the hardware components, see Easy-To-Use System Component Names.

NOTE: Incorrect inventory data is displayed or exported after performing a system erase. For viewing the correct inventory data, see

Viewing and Exporting Current Inventory After Resetting Lifecycle Controller.

NOTE: The inventory that is displayed in the Lifecycle Controller GUI may not be the same as that of any iDRAC interfaces. To get

the updated inventory, run the CSIOR, wait for 2 minutes, reboot the host, and then enter the LCUI.

NOTE: Some attributes like Primary status/Rollup status might show as Unknown while collecting inventory data from LCUI. This is

expected based on the availability of RTCEM inventory.

关于查看和导出出厂资源清册

您可以查看有关工厂安装的硬件组件及其配置的信息。您可以将此信息以 XML 格式导出到 USB 驱动器或网络共享位置。XML 文件

将通过以下格式保存：FactoryShippedHWInventory_<servicetag>.xml。

有关硬件组件的易用名称的更多信息，请参阅易用系统组件名称。

注: 如果选择了重新安排用途或淘汰系统选项（此选项将永久性删除出厂资源清册），查看和导出出厂资源清册功能将灰色显

示。

监测 21