Users Guide

Table Of Contents
and view or edit the
myfile.cfg
file, which includes all iDRAC configuration parameters.
To enable SNMP v3 authentication for a user, use SNMPv3AuthenticationType, SNMPv3Enable, SNMPv3PrivacyType
objects. For more information, see the iDRAC RACADM CLI Guide available at https://www.dell.com/idracmanuals.
If you use the Server Configuration Profile file to configure users, use the AuthenticationProtocol, ProtocolEnable, and
PrivacyProtocol attributes to enable SNMPv3 authentication.
Adding iDRAC user using RACADM
1. Set the index and user name.
racadm set idrac.users.<index>.username <user_name>
Parameter Description
<index>
Unique index of the user
<user_name>
User name
2. Set the password.
racadm set idrac.users.<index>.password <password>
3. Set the user privileges.
For more information, see the iDRAC RACADM CLI Guide available at https://www.dell.com/idracmanuals.
4. Enable the user.
racadm set.idrac.users.<index>.enable 1
To verify, use the following command:
racadm get idrac.users.<index>
For more information, see the iDRAC RACADM CLI Guide available at https://www.dell.com/idracmanuals.
Enabling iDRAC user with permissions
To enable a user with specific administrative permissions (role-based authority):
1. Locate an available user index.
racadm get iDRAC.Users <index>
2. Type the following commands with the new user name and password.
racadm set iDRAC.Users.<index>.Privilege <user privilege bit mask value>
NOTE:
The default privilege value is 0, which indicates the user has no privileges enabled. For a list of valid bit-mask
values for specific user privileges, see the iDRAC RACADM CLI Guide available at https://www.dell.com/idracmanuals.
146 Configuring user accounts and privileges