CLI Guide
Table 35. Details of getremoteservicesstatus (continued)
● In POST
● Out of POST
● Collecting System
Inventory
● Automated Task
Execution
● Lifecycle Controller
Unified Server
Configurator
● Server has halted at
F1/F2 error prompt
because of a POST
error
● Server has halted at
F1/F2/F11 prompt
because there are no
bootable devices
available
● Server has entered
F2 setup menu
● Server has entered
F11 Boot Manager
menu
● Not Initialized
● Reloading data
● Disabled
● In Recovery
● In Use
Example
● racadm getremoteservicesstatus
getsel
Table 36. Details of getsel
Description
Displays all system event log (SEL) entries in iDRAC.
Synopsis
● racadm getsel [-i]
● racadm getsel [-s <start>][-c <count>]
NOTE: If no arguments are specified, the entire log is displayed.
Input
● —i — Displays the number of entries in the SEL.
● -s — Displays the starting record number.
● -c — Specifies the number of records to display.
● --more — Displays a screen.
NOTE: Press Q to exit from the screen.
● -A — Does not display headers or labels.
● -o — Displays each record on a single line..
● -E — Displays RAW SEL data along with the other data.
● -R — Displays only the RAW SEL data for each record
Example
● Display entire log.
racadm getsel
● Display number of records in log.
racadm getsel -i
54 RACADM Subcommand Details