Users Guide

Example of the file name: SAS- RAID_Firmware_xxxxx_xxxx_xxx.exe.
2. Open Virtual Console and boot into Lifecycle Controller by pressing F10 at boot time.
3. Select Get the Latest firmware on the dashboard window.
4. Select Local Drive (CD/DVD/USB).
Enter the name of EXE file and select Update.
5. After successful installation, reboot and verify the installed firmware version in the HII, iDRAC, or BOSS-S1 CLI.
NOTE: BOSS-S1 firmware update through iDRAC/Lifecycle Controller is supported only on firmware version A01 and
above. For more information see Updating BOSS-S1 controller firmware using iDRAC or LC fails on page 28.
NOTE: For Information on how to update using the CLI, see BOSS-S1 CLI commands on page 24.
Related documentation
NOTE:
● For all storage controllers and PCIe SSD documents, go to www.dell.com/storagecontrollermanuals.
● For all Dell OpenManage documents, go to www.dell.com/openmanagemanuals.
● For all operating system documents, go to www.dell.com/operatingsystemmanuals.
● For all PowerEdge documentation, go to www.dell.com/poweredgemanuals.
Overview 11