Users Guide

Figure 5. Removing the M.2 SSD module from the BOSS-S1 adapter card
a. module connector (2)
b. screw (2)
c. M.2 SSD module (2)
Figure 6. Removing the M.2 SSD module from the BOSS-S1 modular card
a. module connector
b. M.2 SSD module
Installing the M.2 SSD module on BOSS-S1 card
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Align the M.2 SSD module connectors with the connectors on the card.
2. Tilt the M.2 SSD module downwards until the module is seated firmly on the card.
3.
CAUTION: To avoid damage to the card, ensure that you do not over tighten the screw.
16 Deploying the BOSS-S1 card