Owners Manual

Viewing System Setup

To view the System Setup screen, perform the following steps:

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE: If your operating system begins to load before you press F2, wait for the system to finish

booting, and then restart your system and try again.

Related Links

System Setup

System Setup details

The System Setup Main Menu screen details are explained as follows:

Option Description

System BIOS Enables you to configure BIOS settings.

iDRAC Settings Enables you to configure iDRAC settings.

The iDRAC settings utility is an interface to set up and configure the iDRAC

parameters by using UEFI (Unified Extensible Firmware Interface). You can enable

or disable various iDRAC parameters by using the iDRAC settings utility. For more

information about this utility, see Integrated Dell Remote Access Controller User’s

Guide at Dell.com/idracmanuals.

Device Settings Enables you to configure device settings.