Owners Manual

Figure 16. Installing the memory module
1. memory module 2. alignment key
3. memory module socket ejector (2)
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. Press F2 to enter System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the installed memory.
3. If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory module is firmly seated in the memory module socket.
4. Run the system memory test in system diagnostics.
Related Links
Safety instructions
Before working inside your system
Installing the cooling shroud
Removing memory modules
After working inside your system
PCIe mezzanine cards
The server module supports Dell PCIe mezzanine cards. x8 PCIe Gen 2 cards are supported. No other
mezzanine cards, such as Ethernet, Fibre Channel, or InfiniBand are supported on server modules
configured for the VRTX enclosure.
The PCIe mezzanine cards provide an interface between server modules and the PCIe switches in the
enclosure.
79