Owners Manual

CAUTION: To prevent damage to the rSPI card, hold the card only by its edges.
NOTE: You must remove the rSPI card to replace a faulty rSPI card or service other
components inside the system.
Steps
1. Align the two screw holes on the rSPI card with the standoffs on the system board.
2. Install the two screws to secure the rSPI card to the system board.
Figure 27. Installing the rSPI card
1. screw (2) 2. rSPI card
3. standoff (2) 4. connector
Next steps
1. Install the PCIe mezzanine card.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing the optional rSPI card
Installing a PCIe mezzanine card
Installing the system cover
Installing a server module
After working inside your system
SD vFlash card
A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It
provides persistent on-demand local storage and a custom deployment environment that allows
automation of server configuration, scripts, and imaging. It emulates USB devices. For more information,
see the Integrated Dell Remote Access Controller User’s Guide at Dell.com/idracmanuals.
93