Owners Manual

Figure 31. Installing the NDC

1. slot on the NDC 2. screw (2)

3. NDC 4. standoff (2)

5. connector 6. tab projections

Next steps

1. Install the PCIe mezzanine card.

2. Follow the procedure listed in the After working inside your system section.

Related Links

Safety instructions

Before working inside your system

Removing the NDC

Installing a PCIe mezzanine card

Installing the system cover

Installing a server module

After working inside your system

Processors

The server module supports up to four Intel Xeon E5-4600 v4 or v3 product family processors.

CAUTION: If you are using a system with two processors, ensure that you use 74 mm wide heat

sinks for processors up to 135 W.