Owners Manual

Figure 17. Removing a PCIe mezzanine card
a. PCIe mezzanine card (2)
b. PCIe mezzanine card connector (2)
c. retention latch
Next steps
1. Install the PCIe mezzanine card.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 53
Related tasks
Before working inside your system on page 53
Installing a PCIe mezzanine card on page 74
After working inside your system on page 54
Installing a PCIe mezzanine card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the PCIe mezzanine card.
NOTE:
You must remove a PCIe mezzanine card to replace a faulty PCIe mezzanine card or service other components
inside the system.
Steps
1. Open the retention latch by pressing the ridged area on the latch, and lifting the end of the latch.
2. If present, remove the connector cover from the PCIe mezzanine card bay.
74
Installing server module components