Owners Manual

Figure 64. Removing the storage controller card
1.
retention screw (2) 2. slot on the storage controller card
3. tab on the storage controller card support bracket 4. standoff (2)
Next steps
1. Install the storage controller card.
2. Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Installing the storage controller card on page 124
Removing a server module on page 52
Removing the system cover on page 55
Removing a hard-drive or SSD cage on page 106
Removing a 2.5-inch (x4) SATA hard-drive or SSD backplane on page 112
Removing a 2.5-inch (x4) SAS hard-drive or SSD backplane on page 109
Removing a 2.5-inch (x2) SATA hard drive or SSD plus 2.5-inch (x2) PCIe SSD backplane on page 115
Removing a 1.8-inch (x12) SAS SSD backplane on page 118
After working inside your system on page 52
Installing the storage controller card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
124 Installing server module components