Owners Manual

2. Lift the system board by its edges and orient it upward.
3. Remove the system board from the chassis by disengaging the USB connectors from the slots on the front wall of the chassis.
4. Ensure that the I/O connector cover is still in place on the I/O connector at the back of the system board.
Figure 68. Different type of screws on the system board
Table 27. Different type of screws
Item Icon Description
1. #2 Phillips round screw (7)
2. #2 Phillips hex screw (6)
3. Hex bolt screw—5 mm (2)
4. Hex nut screw—6 mm (4)
Installing server module components 131