Owners Manual

Option Description

Number of Cores Specifies the number of cores per processor.

Related References

Processor Settings on page 37

Related tasks

Viewing Processor Settings on page 37

SATA Settings

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system.

Related References

System BIOS on page 24

Related tasks

SATA Settings details on page 39

Viewing SATA Settings on page 39

Viewing SATA Settings

To view the SATA Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click SATA Settings.

Related References

SATA Settings on page 39

Related tasks

SATA Settings details on page 39

SATA Settings details

About this task

The SATA Settings screen details are explained as follows:

Option

Description

Embedded SATA Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI by

default.

Pre-operating system management applications 39