Owners Manual

CAUTION: If you are permanently removing the server module, install a server module blank(s). Operating the
system for extended periods of time without a server module blank installed can cause the enclosure to overheat.
3. Slide the server module out of the enclosure.
CAUTION: To prevent damage to the I/O connectors, do not touch connectors or the connector pins.
CAUTION: To protect the I/O connector pins, install the I/O connector covers every time a server module is removed
from the enclosure.
4. Install the I/O connector cover over the I/O connector.
Figure 6. Removing a server module
a. release button
b. VRTX enclosure
c. server module
Next steps
Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Installing a server module on page 53
After working inside your system on page 52
Installing a server module
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
Installing server module components 53