Owners Manual

Related References
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Installing the system cover on page 56
Removing a server module on page 52
After working inside your system on page 52
Installing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the system cover.
NOTE: You must remove the system cover to service other components inside the system.
4. Ensure that no tools or parts are left inside the server module.
Steps
1. Align the alignment guide on the system cover with the alignment guide on the chassis.
2. Lower the cover onto the chassis.
3. Slide the cover until it clicks into position.
A properly seated cover is flush with the surface of the chassis.
56
Installing server module components