Owners Manual

Figure 26. Removing the rSPI card
1. screw (2) 2. rSPI card
3. standoff (2) 4. connector
Next steps
1. Install the rSPI card.
Related References
Safety instructions on page 51
Related tasks
Before working inside your system on page 51
Installing the optional rSPI card on page 82
Removing a server module on page 52
Removing the system cover on page 55
Removing a PCIe mezzanine card on page 71
After working inside your system on page 52
Installing the optional rSPI card
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #2 Phillips screwdriver ready.
4. Remove the rSPI card.
CAUTION: To prevent damage to the rSPI card, hold the card only by its edges.
NOTE: You must remove the rSPI card to replace a faulty rSPI card or service other components inside the system.
82 Installing server module components