Owners Manual

3. Push the drive carrier into the slot until the handle makes contact with the server module.

4. Rotate the carrier handle to the closed position while pushing the carrier into the slot until it locks into place.

The status LED indicator displays a steady green light if the drive is installed correctly. The drive carrier LED green indicator flashes as

the drive rebuilds.

Figure 42. Installing a hard drive

1. release button 2. hard drive(on backplane)

3. hard drive 4. hard drive carrier handle

Figure 43. Installing an SSD

a. release button

b. SSD

c. SSD carrier handle

Next steps

Follow the procedure listed in the After working inside your system section.

Related References

Safety instructions on page 51

Related tasks

Before working inside your system on page 51

Removing a hard drive or SSD on page 96

After working inside your system on page 52

Installing server module components