Users Guide
Updating the management module rmware
In MCM environment, perform the rmware update for all devices from the lead chassis. Also, select the IOMs and storage sleds as
individual devices and not as chassis components, for a successful rmware update.
You can update the management module rmware using the following methods:
1 Individual package method—Through OME–Modular web interface or RESTful API.
2 Catalog-based compliance method
To update the rmware using the Individual package method:
1 Download the DUP from the Dell.com/support/drivers.
2 On the OME–Modular web interface, go to Devices > Chassis and select the chassis for which you want to update the rmware.
3 Click Update Firmware.
The Select Firmware Source window is displayed.
4 Select the Individual package option and click Browse to go to the location where you have downloaded the DUP and click Next.
Wait for the comparison report. The supported components are displayed
5 Select the required components, for example: OME–Modular, and click Update to start the rmware update.
You can schedule the update process to start at the time you want.
6 Navigate to the Monitor > Jobs page to view the job status.
NOTE
: The console is inaccessible during the OME–Modular update process. After the OME–Modular update process, allow 3-5
minutes for the console to reach a steady state.
Updating the rmware using catalog-based
compliance method
To update the rmware using the catalog-based compliance method:
1 Download the DUP from the Dell.com/support/drivers.
2 Use the Dell Repository Manager (Repository Manager) to create the catalog.xml le.
3 Place the catalog.xml that you created using Repository Manager, in a shared location.
4 Go to the Conguration Firmware page to create the catalog and baseline.
5 In the OME–Modular web interface, navigate to theDevices > Chassis page.
6 Click Update Firmware option. The Select Firmware Source window is displayed.
7 Select the Baseline option and select the required baseline from the drop-down.
8 Select the OME–Modular component from the comparison report.
The supported components are displayed.
9 Select the required components, for example: OME–Modular, and click Update to start the rmware update.
10 Navigate to the Monitor > Jobs page to view the job status.
NOTE: Use the Add option on theConguration > Firmware > Catalog Management option to download the catalog from
the www.dell.com/support.
2
12 Updating the management module rmware