Users Guide

The backup le is encrypted and cannot be edited.
6 In Optional Devices, select the compute sleds in the chassis that you want backup.
The number of selected devices is displayed in the bottom left corner of the Backup Chassis window.
7 Click Backup.
A message is displayed indicating that the backup is successful and the chassis Overview page is displayed.
You can check the status and details of the backup process on the Montitoring > Jobs page.
Restoring chassis
You can restore the conguration of a chassis using a back up le, if the backed-up conguration is of the same chassis. You must have the
chassis administrator role with device conguration privilege to restore the chassis.
To restore a chassis:
1 On the chassis Overview page, click More Actions > Restore.
The Restore Chassis window is displayed.
2 Under Restore File Location, select the Share Type where the conguration backup le is located.
3 Enter the Network Share Address, and Network Share Filepath where the backup le is stored.
4 Enter the name of the Backup File.
5 If the Share Type is CIFS, enter the Domain, Username, and Password to access shared location. Else, go to step 6.
6 In the Restore File Password section, enter the Encryption Password to open the encrypted back up le.
7 Click Restore to restore the chassis.
A message is displayed indicating that the chassis is successfully restored.
You can check the status and details of the restore process on the Montitoring > Jobs page.
Exporting chassis proles
You can export chassis proles for cloning the settings to other chassis.
To export the chassis prole:
1 On the OME–Modular home page, click More Actions > Export Prole.
The Export Prole window is displayed.
2 Select the Share Type.
3 Enter the network share address and path.
4 If the Share Type is CIFS, enter the Domain, User Name, and Password to access the shared location.
5 Click Export.
Managing chassis failover
Failover is applicable in dual management module conguration and is the process of transferring the active role to the standby
management module. Reboot the active management module and re-initialize the stand-by management module to assume the active role.
The failover operation takes up to 10 minutes for completion. OME–Modular is unavailable during this process. You must have the chassis
administrator privilege to start a failover.
NOTE
: After a failover, the chassis management performance returns to normal in a few minutes.
NOTE: During a failover, the chassis power state on the OME–Modular GUI is displayed as "o". The original power state is
displayed after the inventory is refreshed.
To start a failover:
On the chassis Overview page, click More Actions > Failover.
Logging in to OME-Modular
27